• NACE equips society to protect people, assets and
    the environment from the adverse effects of corrosion.

TCC Officers and Directory

Technical Coordination Committee (TCC) Officers

Chair: Khlefa Esaklul, 2017-2019
Vice Chair: Roy Fultineer, 2017-2019
Past Chair: Drew Hevle, 2015-2017

Types of Technical Committees

More than 300 technical committees have been formed under the direction of the Technical Coordination Committee (TCC). The TCC serves as the as the administrative and policy-making body of the committees. Within the TCC are five Technology Management Groups (TMGs) that represent a variety of corrosion-related topics:

Specific Technology Groups (STG)

What are STGs?

Here’s where you can start making a difference right away.

By joining a Specific Technology Group (STG), you have taken the first step to learning how you can have an impact on shaping standards for your industry. STGs are the voting groups for NACE standards and technical committee reports. Through membership in these committees you can learn about the various standards in progress or under review for revision and vote to make changes.

And it is easy to join the STGs. When you update your NACE member profile page, you can join the STGs in which you wish to participate. You will receive ballot notifications as they become available, and then just choose the ballots in which you wish to participate.

The STGs are the administrative committees in charge of Task Groups (TGs) and Technology Exchange Groups (TEGs). There are 27 STGs divided among the five TMGs.

Task Groups (TG)

What are TGs?

Task Groups (TG) are committees that are a community of members who come together to write new or revise existing corrosion-related industry standards and reports. Membership in a TG offers member volunteers the opportunity for a greater level of participation. Task Groups usually have a chair and vice chair who are appointed by the administering STG (Specific Technology Group) chair, and eight to 10 committee members who are recruited by the TG chair and vice chair. The committees usually meet to work on standards and reports during NACE conferences once or twice a year, and also via teleconference calls, Web meetings, and through e-mails. With so many methods available for communicating, members can usually fit meetings into their schedules.

To join a particular task group and work on writing a standard or report, contact the TG chair to express your interest. You can find Task Groups listed under each Specific Technology Group below in the Technical Committee Directory

Technology Exchange Groups (TEG)

What are TEGs?

Technical Exchange Groups are committees that meet during NACE conferences to discuss new technologies, and organize and sponsor symposia at CORROSION. The chair and vice chair are usually appointed by the administering STG (Specific Technology Group) chair. Any NACE member can join a TEG. The symposium paper presentations are scheduled during NACE’s annual CORROSION conference held in the spring each year.

Technology Management Groups (TMG)

Technology Coordinators and Program Coordinators. Technology Coordinators are voting members of TCC.

Technology Management Group   Technology Coordinator   Program Coordinator
C1   Art MacKinnon 2017-2019   Kalliopi Aligizaki 2017-2019
C2   Dan Wagner 2017-2019   Aida Lopez-Garrity 2016-2018
N1   Sankara Papavinasam 2017-2019   Anthony J. Gerbino, 2016-2018
N2   Hank Kleinfelder 2017-2019   Frank Cui 2017-2019
S   Alyn Jenkins 2017-2019   Sandra Hernandez 2016-2018


Technical Committee Directory

Committee # Sponsored Committees

   STG 01 Reinforced Concrete (View TG/TEG/WG) - Agenda/Minutes

TEG 043X
To study and disseminate information concerning cathodic protection of reinforcing steel in concrete.

TEG 053X
To study and disseminate information concerning proper design of steel-reinforced concrete structures, the evaluation of those structures, and their remediation.

TG 044
To review and revise as necessary NACE SP0290-2007, "Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures."

TG 045
To review/revise NACE standard TM0105-2016, “Evaluation of Coatings Containing Conductive Carbon Pigmentation for Use as an Anode on Atmospherically Exposed Reinforced Concrete”

TG 046
To reaffirm or revise NACE Publication 01102, “State-of-the-Art Report: Criteria for Cathodic Protection of Prestressed Concrete Structures."

TG 047
INACTIVE Review/revise SP0216-2016, "Sacrificial Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures"

TG 048
INACTIVE To review and revise as necessary SP0408-2014, "Cathodic Protection of Reinforcing Steel in Buried or Submerged Concrete Structures."

TG 049
INACTIVE To write a technical committee report on evaluation of cathodic protection systems on reinforced concrete structures.

TG 050
To write a state-of-the-art report on corrosion inhibitors and admixtures.

TG 052
INACTIVE To review and revise as necessary NACE SP0395-2013, "Fusion-Bonded Epoxy-Coating of Steel Reinforcing Bars."

TG 054
INACTIVE Review or revise as necessary NACE SP0107-2007, “Electrochemical Realkalization and Chloride Extraction for Reinforced Concrete.”

TG 055
To review and revise as necessary SP0308-2008, "Inspection Methods for Corrosion Evaluation of Conventionally Reinforced Concrete Structures."

TG 057
To prepare a state-of-the-art report on applications and latest developments of various corrosion-resistant reinforcing materials, such as stainless steel, galvanized steel, advanced composite materials, and epoxy-coated steel, for use in building and highway infrastructures.

TG 290
INACTIVE Review of NACE Standard SP0187-2017, "Design Considerations for Corrosion Control of Reinforcing Steel in Concrete."

TG 324
To review and revise NACE SP0390-2009, "Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures"

TG 329
INACTIVE To write a standard for testing/evaluation of steel-framed buildings.

TG 356
Write a standard practice on detection and mitigation of DC and AC stray-current-induced corrosion of reinforced and prestressed concrete structures.

TG 400
INACTIVE To review and revise as necessary NACE SP0112-2012, "Corrosion Management of Atmospherically Exposed Reinforced Concrete Structures."

TG 460
To develop a standard practice for use for steel-framed buildings and provide guidance on the evaluation of corrosion condition in complex masonry structures.

TG 472
To review and revise TM0294-2007, "Test Procedure for Embeddable Impressed Current Anodes for Atmospherically Exposed Structures."

TG 504
To write a state-of-the-art report on corrosion evaluation of prestressed concrete structures.

TG 545
Develop a state of the art report on criteria and techniques used to evaluate the effectiveness of corrosion control techniques applied to reinforced concrete structures.

TG 556
Review/revise NACE Pub 01104, “Electrochemical Realkalization of Steel-Reinforced Concrete – A State of the Art Report.”

TG 557
Review and Revise NACE Publication 01105, "Sacrificial Cathodic Protection of Reinforced Concrete Elements- A State-of-the-Art Report"

TG 920
Reaffirm State of the Art Report NACE Pub 01101, "Electrochemical Chloride Extraction and Realkalization of Reinforced Concrete."

TG 921
INACTIVE Reaffirmation of NACE Publication 11100, "Use of Reference Electrodes for Atmospherically Exposed Reinforced Concrete Structures."

   STG 02 Coatings and Linings (View TG/TEG/WG) - Agenda/Minutes

STAG L70
Determine uses, application, and performance of coatings and surface preparation enhancers for atmospheric service of particular interest for the industrial environments and commercial equipment and infrastructure in Latin America.

TEG 192X
To provide a format for handling problems and issues that affect the owner and contractor utilizing coatings. Problems and issues may include hazardous waste, volatile organic compounds, applicator training, federal and state regulations, and others that may develop.

TEG 255X
Exchange of information regarding thermal-spray coatings (TSCs) used for corrosion protection.

TEG 311X
Share information concerning, and discuss effective methods for, corrosion control of fasteners used with structural, piping, and equipment connections.

TEG 346X
Review and critique laboratory testing methods designed to predict performance in an offshore environment. Assess test variables and gather data needed to improve industry standard techniques.

TEG 399X
Exchange information, create task group for state-of-the-art report, followed by formation of a task group to write a standard practice, and sponsor symposium.

TEG 424X
To discuss issues of spray-applied insulative coatings for elevated-temperature exterior surfaces.

TEG 428X
To discuss and furnish technical information on the process of hot-dip galvanizing and its use as a corrosion protection system for steel fabrications as well as the interaction of hot-dip galvanized coatings with other corrosion protection systems.

TG 005
To review and revise NACE Publication 02203/ICRI Technical Guideline 03741/SSPC-TR 5, "Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete."

TG 146
Review and revise joint standard NACE No. 12/AWS C2.23M/SSPC-CS 23.00, "Specification for the Application of Thermal Spray Coatings (Metalizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel."

TG 148
Revise NACE Publication 02107, "Coatings for Protection of Threaded Fasteners Used with Structural Steel, Piping, and Equipment."

TG 260
Review and revise as necessary the test methods in NACE Standard TM0304.

TG 312
Review and revise as necessary the test methods in NACE Standard TM0404.

TG 313
To review and revise NACE SP0108-2008, Corrosion Control of Offshore Structures by Protective Coatings.

TG 340
Develop a standard practice addressing a standard method and grading system to assess the in-service condition of offshore coatings. Provide direction regarding the use of assessment data in managing maintenance painting programs. The documented process will serve as an aid in the planning, budget, and execution of offshore maintenance programs.

TG 415
Review and revise if necessary NACE Standard RP0281-2004, "Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures."

TG 422
To write a state-of-the-art report.

TG 477
To write a standard to determine substrate temperature limits and surface temperature of liquid-applied insulative materials for personnel protection.

TG 525
Develop test methods for determining the true insulative value of liquid insulative materials applied on steel surfaces.

TG 537
To develop terminology and definition, including components of coating systems, fabrication of "cup", technical requirements, application process, and requirements for a coating system for bolt connections.

TG 541
To specify the laboratory test method to evaluate performances of heavy anti-corrosion coating systems for reinforced concrete structures in marine atmospheric environments; to provide detailed requirements for components and technical requirements of the coatings systems, application process and requirements, storage, and inspection methods.

TG 549
Develop a document which describes a test method for measuring leachable chloride levels and acceptable levels for coatings applied to stainless steel.

TG 551
Purpose a standard for the utilization of rust converters in the preparation of ferrous surfaces.

   STG 03 Coatings and Linings (View TG/TEG/WG) - Agenda/Minutes

TEG 351X
Discussion of the development of a recommended test procedure for qualification of coatings used under insulation service.

TEG 354X
Discuss blistering of underground pipeline coatings, causes of blistering, and prevention methods.

TEG 435X
To hold technical information exchanges (TIEs) on the effects of bioethanols, aromatic ethanols, and sulfurous emissions on fused silica containment vessels.

TEG 526X
Provide a forum for discussing the various technical details associated with testing requirements/conditions specified for coatings or other used in this environment. Attempt to identify the most critical parameters of the testing requirements and discuss the possibility of establishing a standardized/harmonized test program that could possibly be used to qualify things for multiple specifications.

TG 009
To review and revise Joint Standard NACE No. 10/SSPC-PA 6, "Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks."

TG 030
To update and revise NACE Standard TM0102-2002, "Measurement of Protective Coating Electrical Conductance on Underground Pipelines."

TG 031
To review and revise NACE SP0394-2013, "Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating."

TG 034
To write a test method and criteria for evaluation of gouge resistance of a particular coating.

TG 037
To review and revise NACE Standard RP0304-2004 as necessary.

TG 141
To update NACE SP0892-2007 to incorporate current technologies and practices to successfully protect concrete.

TG 246
Revise Joint Standard NACE No. 11/SSPC-PA 8, “Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels.”

TG 247
To review and revise or reaffirm NACE Standard RP0105-2005, "External Repair, Rehabilitation, and Weld Joints on Buried Steel Pipelines."

TG 248
To review and revise as needed NACE Standard RP0303-2003, "Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control."

TG 249
To review and revise as necessary NACE Standard RP0402-2002, "Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control."

TG 250
Review and revise/reaffirm as necessary NACE Standard RP0602-2002, "Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control."

TG 251
To review and revise or reaffirm SP0109-2009, "Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines."

TG 263
Review and revise as necessary the test methods in NACE Standard TM0104-2004.

TG 264
Review and revise as necessary the test methods in NACE Standard TM0204-2004.

TG 265
Review and revise as necessary NACE SP0185-2007, "Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe."

TG 266
Review and revise as necessary NACE Standard TM0174-2011, "Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service."

TG 281
To develop a standard practice for a minimal specification for the field application, repair, and testing for a polyurethane coating to be used on the exterior of buried pipelines.

TG 296
Review and revise as necessary NACE Standard RP0375, "Wax Coating Systems for Underground Piping Systems."

TG 298
To review and revise as necessary NACE Standard RP0399-2004, "Plant-Applied External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control."

TG 336
Develop a technical committee report that outlines state-of-the-art practices as described in the title.

TG 337
Develop a standard practice that identifies common aspects of field installation pertaining to quality installation and long-term performance.

TG 352
To develop a standard practice for minimum specifications for external coatings for use in directional drill service.

TG 425
Describe available systems, performance, and industry-accepted test criteria for coatings under insulation.

TG 470
To develop a standard test method to conduct the cathodic disbondment test.

TG 479
Review ISO 21809 with the goal to adopt or adopt with changes (amendments) to the standard and create a NACE/ISO, possibly modified, published standard

TG 490
To develop a new standard practice for the pre-qualification requirements of internal flow efficiency coatings for pipelines.

TG 507
To review and revise as necessary SP0188-2006, "Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates."

TG 508
To review and revise as necessary SP0490-2007, "Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 µm (10 to 30 mil)."

TG 516
To write a standard practice for testing coatings for corrosion under insulation (CUI) prevention.

TG 520
To develop a simple and reliable peel test standard for the three-layer polyethylene, three-layer polypropelene, heat-shrink sleeve and tape coatings in the field and laboratory.

TG 523
Write a state-of-the-art report describing coating failure mechanisms and integrity management of pipelines after coating failure.

TG 540
Review and revise SP0298-2007 (formerly RP0298-98), “Sheet Rubber Linings for Abrasion and Corrosion Service.”

TG 555
To develop a new test method to measure the flexibility (flexural strain) of the coating applied on metal substrates. This test method is applicable to pipeline coating on steel substrates and is also applicable to other applications. The coating flexural strain is a coating property, which is relatively simple to measure, and can be used to evaluate coating degradation as a result of weathering, thermal aging, water immersion, and other environmental conditions.

   STG 04 Coatings and Linings (View TG/TEG/WG) - Agenda/Minutes

TEG 423X
Discuss the effects of coating performance when applied over nonvisible, nonwater-soluble contaminants and their effects on cathodic protection performance.

TEG 469X
To provide a forum to discuss various issues affecting surface preparation.

TG 006
To review, revise, or reaffirm as necessary joint blasting standards NACE No. 1-4/SSPC-SP 5, 10, 6, and 7: White Metal Blast Cleaning, Near-White Metal Blast Cleaning, Commercial Blast Cleaning, and Brush-Off Blast Cleaning, and NACE No. 8/SSPC-SP 14, Industrial Blast Cleaning.

TG 275
INACTIVE Develop a standard practice for surface preparation of metals to WJ-1 by high-pressure waterjetting. This standard will be based on information provided in NACE No. 5/SSPC-SP 12, "Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating."

TG 295
Review and Revise as needed NACE SP0178-2007, “Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service.”

TG 320
To review and revise as necessary NACE No. 13/SSPC-ACS-1, "Industrial Coating and Lining Application Specialist Qualification and Certification."

TG 323
To review and update joint technical committee report NACE 6G198/SSPC-TR 2, "Wet Abrasive Blast Cleaning."

TG 417
Review and revise as necessary joint standard NACE No. 6/SSPC-SP 13, "Surface Preparation of Concrete," to reflect current industry practice and to reflect proper reference to other industry publications.

TG 419
Review and revise as necessary NACE Standard RP0287-2002, "Field Measurements of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape," and to include other methods of profile measurement now being widely utilized throughout the industry.

TG 443
Develop a technical committee report detailing commonly used soluble salts field test methods.

TG 518
Develop a standard regarding soluble salt testing frequency and locations on previously coated surfaces.

TG 546
Develop a Standard of allowable soluble salt limits according to the assets service environment define environments and limits.

   STG 05 Cathodic/Anodic Protection (View TG/TEG/WG) - Agenda/Minutes

TEG 016X
To investigate areas for research in cathodic protection and underground corrosion control.

TEG 022X
To develop close coordination of NACE technical committees with the Underground Corrosion Control Coordinating Committees in the United States and elsewhere; to prepare a map or list designating areas in which committees are active and giving a contact person; to encourage the formation of coordinating committees in needed areas.

TEG 024X
Discuss DC and AC transit stray current issues.

TEG 179X
To provide the cathodic protection technology necessary for engineering solutions to underground corrosion problems.

TEG 197X
To investigate the various methods of protecting pipe-type cables against corrosion and issue recommendations for the protective systems.

TEG 262X
Discussions and informal presentations about interference problems, pipeline, railroads, light rail, pipe, and other structural interference.

TEG 321X
INACTIVE Conduct information exchange meetings on corrosion probes for soil and concrete.

TG 017
Review and revise as necessary NACE Standard TM0108-2012, "Testing of Catalyzed Titanium Anodes for Use in Soils or Natural Waters."

TG 018
To prepare a standard practice on corrosion control of structural steel piling in nonmarine applications.

TG 019
INACTIVE To review and revise SP0100-2014, "Cathodic Protection to Control External Corrosion of Concrete Pressure Pipelines and Mortar-Coated Steel Pipelines for Water or Waste Water Service."

TG 023
INACTIVE To review and revise as necessary NACE Pub 05114, "High Voltage Direct Current Interference."

TG 025
To review and update NACE SP0177-2014 (formerly RP0177), "Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems." This standard practice deals with corrosion control and related safety procedures recommended.

TG 167
To revise NACE SP0388-2014 (formerly RP0388), "Impressed Current Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks," as necessary.

TG 210
To develop a standard on the application and interpretation of data from external CP coupons used in the evaluation of cathodically protected metallic structures.

TG 284
To review and update NACE Standard SP0196-2011 (formerly RP0196), "Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks," as required.

TG 297
INACTIVE Update Technical Committee Report 10B189 to include the latest technologies for both utility stray current monitoring, design, mitigation, and evaluation and transit system negative bus-to-earth isolation and techniques for stray current mitigation.

TG 388
To develop a standard for rectifier safety.

TG 429
INACTIVE To review and update NACE Publication 1E100-2012, "Engineering Symbols Related to Cathodic Protection."

TG 430
To prepare a standard document on how to assess, mitigate, and monitor corrosion caused by alternating current on buried cathodically protected pipelines.

TG 526
To develop a reference standard for the design of cathodic protection, both galvanic and impressed current, for metallic structures located in quiescent or flowing fresh water.

   STG 06 Cleaning (View TG/TEG/WG) - Agenda/Minutes

TEG 188X
Disseminate technology relative to the use of chemical and mechanical cleaning of plant equipment.

TG 344
To review and revise as necessary NACE Standard TM0193-2000, “Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93 °C (200 °F).”

TG 468
To develop a standard for laboratory corrosion testing of metals in static chemical cleaning solutions at temperatures Above 100 °C (212 °F).

   STG 08 Corrosion Management (View TG/TEG/WG) - Agenda/Minutes

TEG 185X
To hold a series of workshops/symposia aimed at providing case studies, "war stories," and examples of how different industries have utilized corrosion life-cycle management to reduce overall costs and to explore alternate management methods (e.g., material selection, cathodic protection, inhibitors) that can be utilized.

TEG 453X
Initiate discussions and reviews of practices for corrosion management and other issues associated with CCS. To include capture process, transportation, and storage.

TEG 531X
Sustainability has become a widespread driver of institutional management transformation and prioritization. Prioritization and optimization of corrosion management as a means for enhancing materials sustainability should be part of this transformation. An important framework that has been introduced by William McDonough and Ellen MacArthur foundation is the circular economy, and the related idea of cradle to cradle. Materials integrity and methods to assess materials integrity are crucial enablers of this new economic model.

TG 200
To review and rewrite a new standard based on withdrawn NACE Standard RP0272-72, "Direct Calculation of Economic Appraisals of Corrosion Control Measures." Also, to evaluate and compile alternative "best practice" life-cycle corrosion cost management methodologies.

TG 439
Develop a standard for managing corrosion and degradation of bridges. This standard would include reference to existing standards, life-cycle management methods, maintenance and repair decision making, and risk assessment.

TG 527
Development and sustainment of a joint NACE International/SSPC standard on corrosion prevention and control planning for use by government acquisition professionals and as an integral component of future improvements to the acquisition of systems, facilities, and infrastructure.

   STG 10 Nonmetallic Materials of Construction (View TG/TEG/WG) - Agenda/Minutes

TEG 191X
Sponsor symposium at annual conference on managing corrosion with polymer-based materials such as FRP, thermoplastic materials, elastomers, and other composite materials of construction.

TEG 239X
Presentations on basics of polymer-based materials such as FRP, elastomers, thermoplastics, and other composite materials.

TEG 528X
Introductory workshop/seminar for new engineers wanting to better understand how non-metallic materials of construction are designed an where they are commonly used to control corrosion.

   STG 11 Water Treatment Systems (View TG/TEG/WG) - Agenda/Minutes

TEG 149X
To identify key factors and promote appropriate techniques for application of biocides to both open and closed cooling water systems.

TEG 150X
INACTIVE To collect, review, and disseminate information useful for evaluating and implementing biocide alternatives to gaseous chlorine in cooling water systems.

TEG 159X
To collect, develop, and disseminate information on the control and remediation of corrosion, deposition, and microbiological activity in building fire protection systems.

TEG 163X
To identify, classify, and suggest remedies for common and uncommon failures occurring in boilers. The boiler proper with its steam-generating equipment, superheater, and economizer fall within the scope. It is the intent of the committee to solicit from knowledgeable and interested parties a listing of failure types (if identifiable) with an indication of frequency or ranking relative to unscheduled outage downtime. In addition, problem/solution-type examples of the more frequent/important failures are sought, hopefully to seed symposia, panel discussions, and/or publications.

TEG 194X
INACTIVE To facilitate the identification, understanding, and dissemination of all aspects of plant aqueous effluent reuse for recycle of effluent into the plant process or minimization of plant discharges and investigate the impact on current scale and corrosion technology.

TEG 243X
INACTIVE To exchange information on lay-up/start-up of steam-generating systems for reduction of corrosion and extension of equipment life.

TEG 389X
Hold open discussions to develop means to better define the cost of water and steam system-related corrosion in the chemical processing and petroleum refinery industries, and identify methods to disseminate this information.

TEG 503X
To accumulate and disseminate information about water treatment applications in industrial and commercial systems. This provides a training role in corrosion, deposition, and microbiological control as well as monitoring in these areas.

TG 147
INACTIVE To investigate and disseminate information in the form of a technical committee report on the internal corrosion and failure of water heaters in potable systems.

TG 151
INACTIVE To review and revise as necessary NACE Pub 11206, "Biocide Monitoring and Control in Cooling Towers"

TG 152
To prepare and publish a manual on the monitoring and control of the water chemistry and physical integrity of cooling water systems.

TG 153
To review and revise or reaffirm as necessary ANSI/NACE SP0300-2016/ISO 16784-1:2006, "Pilot Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems."

TG 157
Review and revise or reaffirm NACE Publication 46107, "Control of Corrosion, Deposition, and Microbiological Growth in Recirculating Water Systems in Buildings."

TG 158
INACTIVE To review and revise as necessary SP0214-2014, “Inspection, Cleaning, and Remediation Technology for Water Piping in Buildings.”

TG 160
To establish effective methods for shut-down, lay-up, and start-up of components within steam-generating systems, and to write a standard. This may include, but not be limited to, feedwater lines, feedwater heaters, deaerators, economizers, steam generators, superheaters, reheaters, condensers, and condensate lines.

TG 218
INACTIVE To review and revise or reaffirm as necessary NACE Standard TM0199-2013, "Standard Test Method for Measuring Deposit Mass Loading ('Deposit Weight Density') Values for Boiler Tubes by the Glass-Bead-Blasting Technique."

TG 219
INACTIVE To prepare a bibliography on erosion-corrosion topics.

TG 234
To write a standard on initial conditioning of cooling water equipment.

TG 235
To write a guidelines to provide a procedure for monitoring all treatment protocols including physical treatments to demonstrate their efficacy.

TG 241
INACTIVE To review and revise as necessary NACE SP0189-2013 (formerly RP0189), "On-Line Monitoring of Cooling Waters."

TG 244
Review and revise or reaffirm NACE SP0590-2015 (formerly RP0590), "Prevention, Detection, and Correction of Deaerator Cracking."

TG 361
INACTIVE To review all of the committee reports, standards, and other publications of NACE and EFC that are relevant to the design and operation of industrial cooling water systems for the purpose of resolving conflicts and developing a joint publication.

TG 375
To write a standard to replace RP0392-2001, “Recovery and Repassivation After a Low pH Excursions in Open Recirculating Cooling Water Systems."

TG 381
To write a report on building fire protection systems covering issues and proposed solutions.

   STG 30 Oil and Gas Production—Cathodic Protection (View TG/TEG/WG) - Agenda/Minutes

TEG 166X
To sponsor a forum for discussion and make mini-presentations on cathodic protection in seawater. This will include but not be restricted to cathodic protection design and monitoring in seawater.

TG 168
To prepare a state-of-the-art report on cathodic protection retrofit design for offshore structures in deep and shallow waters.

TG 169
To review and revise as necessary ANSI/NACE SP0115-2015/ISO/15589-2,"Petroleum , Petrochemical, and Natural Gas Industries—Cathodic Protection of Pipeline Transportation Systems—Part 2: Offshore Pipelines.”

TG 170
Update NACE SP0176-2007 (formerly RP0176),"Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production."

TG 454
INACTVE To review or revise as necessary SP0387-2014, "Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications."

TG 459
INACTIVE To review and revise as necessary NACE Standard TM0190-2017, "Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes."

TG 505
INACTIVE Review and revise as necessary NACE SP0492-2006, "Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes."

TG 911
INACTIVE Review/revise/reaffirm NACE Publication 7L198, "Design of Galvanic Anode Cathodic Protection Systems for Offshore Structures."

   STG 31 Oil and Gas Production—Corrosion and Scale Inhibition (View TG/TEG/WG) - Agenda/Minutes

TEG 059X
To collect, evaluate, and disseminate information from all sources of CO2 corrosion in the oil and gas industry, including the use of CO2 for enhanced recovery. To update user experience and state-of-the-art advances; to serve as a focal point in liaison with other technical committees.

TEG 077X
To identify the issues involved in the development of an internal erosion and corrosion monitoring program.

TEG 092X
To serve as an information exchange between technologists and corrosion specialists with regard to corrosion that develops beneath deposits.

TEG 201X
To develop a coherent approach to predicting corrosiveness of oilfield environments, to provide a forum for the discussion of these predictive methods, and to exchange information on this subject.

TEG 202X
1. Exchange information and technology on produced and injection fluid issues during conventional and unconventional production including deepwater. Issues include mineral scaling, corrosion, gas hydrates, and wax and asphaltene deposits. 2. Sponsor symposia and other formal technical information exchange functions.

TEG 253X
Discussion of issues and testing methods related to evaluation of inhibitors in the oil and gas industry.

TEG 282X
To promote technical information exchange on corrosion-related topics that stem from the presence of H2S and other sulfur-containing substances in oil and gas production operations.

TEG 286X
To sponsor a biennial symposium on "Control of Problematic Micro-Organisms in Oil and Gas Field Operations."

TEG 341X
To discuss unique corrosion and erosion issues associated with oil sands production (mining operations and steam-assisted gravity drainage [SAGD] operations).

TEG 413X
Exchange information and experiences and share best practices on properties, composition, sources, and formation mechanisms of black powder; mitigation and control methods (inhibition, internal coatings, filtration, etc.); and sampling and analysis techniques, handling, and disposal of black powder in gas pipelines.

TEG 421X
To develop a fundamental understanding of elemental sulfur corrosion mechanisms; develop S-corrosion mitigation strategy; develop laboratory evaluation protocol; and develop field monitoring methods.

TEG 433X
Knowledge sharing and exchange in the area of internal corrosion monitoring in oil and gas subsea structures, including but not limited to pipelines, wells, and topsides.

TEG 513X
Exchange information on current gaps and future needs in controlling corrosion in oil and gas production.

TEG 514X
To discuss unique corrosion issues on materials typically used in technical equipment used for oil and gas exploration such as drilling tools and wire line tools.

TG 070
INACTIVE To prepare a state-of-the-art report on field techniques for corrosion inhibitor evaluation using DC polarization methods.

TG 072
To review and revise as necessary NACE Publication 31105, "Dynamic Scale Inhibitor Evaluation Apparatus and Procedures in Oil and Gas Production."

TG 074
To prepare a NACE technical committee report on stripping columns for the removal of oxygen from oilfield waters by reviewing and updating the information from the obsolete NACE Standard RP0278-86.

TG 075
To prepare a technical committee report on selection, application, and evaluation of biocides in the oil and gas industry.

TG 076
Prepare a technical committee report summarizing various predictive methods and provide guidelines for application of those methods for prediction of corrosiveness.

TG 078
INACTIVE (1) Review areas of concern, difficulty, and challenge in deep water production with respect to scale and corrosion control; (2) review and summarize the current state of chemical treatments in deep water; (3) research solutions; and (4) provide conclusions with regard to the main issues in the form of a technical committee report.

TG 214
To review and update NACE Standard TM0194-2014, "Field Monitoring of Bacterial Growth in Oilfield Systems," as necessary.

TG 245
To identify the issues involved in the development of an internal erosion and corrosion monitoring program.

TG 330
INACTIVE Prepare a technical committee report detailing various laboratory test methods for the evaluation of corrosion inhibitors.

TG 345
Review and revise as appropriate NACE SP0499-2007, "Corrosion Monitoring in Seawater Injection Systems."

TG 373
INACTIVE Review and revise as appropriate NACE SP0192-2012 (formerly RP0192), "Monitoring Corrosion in Oil and Gas Production with Iron Counts."

TG 376
INACTIVE To review and revise as appropriate NACE Publication 1D177, "Monitoring Techniques for the Control of Corrosion of Drill Pipe, Casing, and Other Steel Components in Contact with Drilling Fluids."

TG 383
Review and revise as necessary NACE Standard TM0197-2002, "Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil and Gas Production)."

TG 384
Review and revise as necessary NACE Standard TM0397-2002, "Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers."

TG 409
Review and revise as necessary NACE Standard RP0775-2005, "Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations."

TG 414
INACTIVE Review and revise as necessary NACE standard TM0399-2005, "Standard Test Method for Phosphonate in Brine."

TG 445
To review and revise NACE Publication 1D199 on internal corrosion monitoring of subsea production and injection systems.

TG 478
To write a report to summarize what is known about prediction, prevention, and mitigation of top-of-the-line corrosion.

TG 492
Review and revise as necessary SP0195-2007 (formerly RP0195), "Corrosion Control of Sucker Rods by Chemical Treatment."

TG 493
Review and revise as necessary TM0374-2007, "Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)."

TG 496
To review and revise as necessary NACE SP0273-2007 (formerly RP0273), "Handling and Proper Usage of Inhibited Oilfield Acids."

TG 512
To write a standard on how to apply chemicals downhole in oil and gas wells using capillary tubing.

TG 528
To revise NACE Publication 1D182, “Wheel Test Method Used for Evaluation of Film-Persistent Corrosion Inhibitors for Oilfield Applications,” and to add new test methods to the existing technical committee report.

TG 532
Review NACE Publication 1D191, "A Review of Screening Tests for Gypsum Scale Removal Chemicals" to determine its relevancy to the existing state of the art for this experimental procedure. If it is still relevant, then revise the report.

TG 534
Review and revise if necessary NACE Publication 1C187, "Use of Galvanic Probe Corrosion Monitors in Oil and Gas Drilling and Production Operations."

TG 548
Update, revise and reaffirm MR0174-2007 Standard.

TG 550
Develop a standard that would identify basic required information, a corrosion inhibitor integrity window, the basic required testing, and field management for Oil & Gas field applications.

   STG 32 Oil and Gas Production—Metallurgy (View TG/TEG/WG) - Agenda/Minutes

TEG 374X
Plan and host information exchange meetings for materials in upstream oil and gas operations.

TG 082
Update ANSI/NACE Standard TM0284, "Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking," as need arises.

TG 084
To review and revise as necessary NACE Standard MR0176-2012, "Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments."

TG 085
To update NACE Standard TM0177-2005, "Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments," and to investigate other test methods as required.

TG 133
INACTIVE To review and revise as necessary NACE Standard TM0198-2016, "Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service."

TG 257
Develop software to record and retrieve environmental cracking data from MR0175 ballots and other sources as required. Enter data accurately.

TG 299
To review and vote on revisions or addenda proposed for NACE MR0175/ISO 15156, and technical reports or other data published by the Maintenance Panel.

TG 328
INACTIVE To integrate information on welding, fabrication, and assessment of corrosion-resistant alloys with the associated technology gaps identified in the state-of-the-art review, into the revision of NACE Publication 1F192, "Use of Corrosion-Resistant Alloys in Oilfield Environments."

TG 494
INACTIVE To develop four-point bend standard test method.

TG 536
To develop a standard test method for the qualification and selection of carbon and low-alloy steels with resistance to stress-oriented hydrogen-induced cracking (SOHIC) for sour service in H2S-containing environments.

TG 544
Develop a new NACE test method to assess sour cracking resistance by applying a dynamic mechanical load of tensile specimen.

TG 554
Draft a test method to evaluate the resistance to environmentally introduce hydrogen stress cracking (HSC) in matching and dissimilar filler metal welds.

WG 085c
To make technical improvements in the standardized procedure of NACE Standard TM0177-2005, "Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments," for measuring the sulfide stress cracking resistance of low-alloy steels and other alloys that are intended for sour service by means of the double-cantilever-beam (DCB) test.

WG 085e
Develop methods and guidance for updating TM0177 section VII for assessment of metallic materials for environmentally associated cracking in H2S at elevated temperatures.

   STG 33 Oil and Gas Production—Nonmetallics and Wear Coatings (Metallic) (View TG/TEG/WG) - Agenda/Minutes

TEG 086X
To investigate progress in acoustic, thermal and cryogenic insulation systems used in oil and gas production.

TEG 319X
To exchange information and present new technology on elastomers and nonmetallics used for oilfield sealing service.

TEG 500X
Discuss items related to composite materials and elastomers used in the oil and gas industry.

TEG 501X
Exchange information on accelerated testing.

TEG 524X
(1) Provide a forum to share current state of the art in industry and (2) explore current industry need/interest in industry standard(s).

TG 086
INACTIVE- To investigate progress in insulation systems used in oil and gas production.

TG 411
To review and revise as necessary NACE Standard TM0187-2003, "Evaluating Elastomeric Materials in Sour Gas Environments."

TG 449
Review and revise NACE Standard TM0384-2002, "Holiday Detection of Internal Tubular Coatings of Less Than 250 µm (10 mils) Dry-Film Thickness," as appropriate.

TG 450
Review and revise NACE Standard TM0186-2002, "Holiday Detection of Internal Tubular Coatings of 250 to 760 µm (10 to 30 mils) Dry Film Thickness," as appropriate.

TG 482
To reaffirm or review and revise as necessary TM0185-2006, "Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing."

TG 483
To review and revise as necessary TM0297-2008, "Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials."

TG 486
To review and revise as necessary RP0291-2005, "Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories."

TG 487
To review and revise as necessary SP0191-2008 (formerly RP0191), "Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories."

TG 506
To review and revise or reaffirm as necessary NACE SP0181-2006, "Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment."

   STG 34 Petroleum Refining and Gas Processing (View TG/TEG/WG) - Agenda/Minutes

TEG 113X
To provide a forum for the exchange and dissemination of information on corrosion in gas treating units of oil and gas production and refining via information exchange and symposia.

TEG 205X
Sponsor group for refining symposium and refining information exchange.

TEG 206X
Sponsor state-of-the-art sessions on refining industry corrosion.

TEG 207X
Provide a forum for discussion of new corrosion mitigation or measurement technology developments and joint industry research projects of possible interest to the refining and gas processing industries.

TG 173
Review and revise or reaffirm NACE SP0170-2012, "Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During a Shutdown of Refinery Equipment."

TG 174
Coordination of efforts and content of NACE SP0114 on Refinery Injection and Process Mix Points with API’s recommended practice being developed on the same subject.

TG 176
INACTIVE Develop a technical committee report to serve as a prediction tool to be used for predicting sulfidation in hydroprocessing units. In addition, the technical committee report will serve to warn industry of the potential corrosion problems in this area of operation.

TG 231
This task group's role is to review inquiries, address proposed ballot changes to MR0103, and monitor impact of changes made to MR0175. It is expected that ongoing requests to add or modify the requirements for materials used in petroleum refining and exposed to possible sulfide stress corrosion cracking will be addressed by this standing task group.

TG 268
Review and revise or reaffirm SP0296-2010 (formerly RP0296), "Detection, Repair, and Mitigation of Cracking in Refinery Equipment in Wet H2S Environments."

TG 274
INACTIVE Review and revise or reaffirm NACE Publication 34105, "Effect of Nonextractable Chlorides on Refinery Corrosion and Fouling."

TG 300
Review and reaffirm SP0205-2010 (formerly RP0205), "Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures."

TG 301
To review and revise or reaffirm NACE Publication 8X194, "Materials and Fabrication Practices for New Pressure Vessels Used in Wet H2S Refinery Service."

TG 302
Work on a proposed reaffirmation of NACE SP0407-2007, "Format, Content, and Guidelines for Developing a Materials Selection Diagram."

TG 342
Update Publication 34109, “Crude Distillation Unit—Distillation Tower Overhead System Corrosion.”

TG 347
Update Publication 34108 "Review and Survey of Alkaline Carbonate Stress Corrosion Cracking in Refinery Sour Waters."

TG 348
INACTIVE To oversee the technical content and information in the Corrosion Control in the Refining Industry course offered by NACE, including writing or updating sections of the course and providing input to NACE on qualified instructors for the course.

TG 393
Explore possibility of establishing certification. Work with Certification Committee to establish criteria, testing requirements, and process for certification specific to refinery corrosion specialists. Oversee the technical content and information in the Corrosion Control in the Refining Industry course offered by NACE, including writing or updating sections of the course and providing input to NACE on qualified instructors for the course ensuring that it is consistent with the Petroleum Refinery Corrosion Specialist Certification.

TG 489
Develop a technical committee report to increase awareness of the potential impact of upstream crude oil production and transportation additives on refinery corrosion and fouling. The types of damage caused by the contaminants and methods to mitigate the risk of those types of damage using tools such as the crude selection process, process surveillance, equipment monitoring, etc., will be described. Task group work will focus on classes of chemicals used to enhance oilfield production and other upstream process additives.

TG 510
To advise the API committee on API 751 of the recommended change to the materials and corrosion content of the document.

   STG 35 Pipelines (View TG/TEG/WG) - Agenda/Minutes

TEG 010X
To provide an informal discussion forum for representatives from gas distribution companies to have a free exchange of ideas on subjects and areas for technical symposium topics and committee work assigned for resolution and documentation.

TEG 080X
Provide a forum for the discussion and dissemination of techniques for control of corrosion on oil, gas, and storage well casings.

TEG 080X TIE
Exchange information about application of cathodic protection for external surfaces of steel well casings.

TEG 132X
To cover issues related to corrosion management of all structural components of ASTs. Issues will include design practices, life-cycle assessment, corrosion monitoring and corrosion mitigation techniques such as internal linings, external coatings, undertank CP, internal CP, VpCl, seal systems, sand quality and others.

TEG 208X
Discussions and informal presentations about road, railroad, river, wetland, etc., crossings by directional drilling, thrust boring, casing, and HDD-type pipeline crossings, etc. Techniques, cathodic protection, coatings, etc., are included.

TEG 267X
To provide a discussion forum for pipeline operator representatives, suppliers of pipeline in-line inspection services, and other interested parties to exchange information and ideas; and to sponsor technical symposia for the exchange of ideas and information in areas of pipeline integrity assessment and assurance.

TEG 292X
Discuss direct assessment experiences, issues, and concerns for external corrosion direct assessment (ECDA), internal corrosion direct assessment (ICDA), and stress corrosion cracking direct assessment (SCCDA). Document issues and submit to respective committees.

TEG 314X
Discussion of current topics related to corrosion control issues concerning the liquid petroleum pipeline industry.

TEG 338X
Discuss technology improvements in the area of using coupons for cathodic protection monitoring and collecting suggestions for improving new standards on this subject.

TEG 363X
Discuss experiences, issues, and concerns for close-interval survey and other CP surveys such as side-drain surveys and cell-to-cell hotspot surveys. Document issues and submit to respective committees.

TEG 397X
To provide a forum for information sharing on hydrotesting and long-term wet storage.

TEG 462X
Discussions and informal presentations about corrosion and degradation arising during the storage and conveyance of liquid transportation, conventional fuels/biofuels.

TEG 463X
Exchange of information on field experience, laboratory, and field observations to study the concept of CP shielding and shielding coatings and understand the key causes of pipeline external corrosion.

TG 011
INACTIVE Review and revise as necessary NACE Standard RP0285-2002, "Corrosion Control of Underground Storage Tank Systems by Cathodic Protection."

TG 012
INACTIVE To review and revise if necessary NACE SP0200 (formerly RP0200), "Steel-Cased Pipeline Practices."

TG 013
To review and revise as necessary NACE Standard RP0193-2001, "External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms."

TG 014
To revise NACE Publication 10A292, "Corrosion Control of Ductile and Gray Cast Iron Pipe."

TG 015
To develop a standard practice on the requirements for electrical continuity and techniques for achieving effective continuity bonds for cathodically protected pipelines.

TG 020
Review and reaffirm or revise NACE Standard TM0497-2002, "Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems."

TG 038
To review and revise as necessary NACE SP0106-2006, "Control of Internal Corrosion in Steel Pipelines and Piping Systems."

TG 039
To review and revise as necessary NACE Publication 35100, "In-Line Nondestructive Inspection of Pipelines," as appropriate.

TG 040
INACTIVE To write a state-of-the-art report on stress corrosion cracking of line pipe, and later to write a standard on the same topic.

TG 041
To review and revise NACE SP0502-2010 (formerly RP0502), "Pipeline External Corrosion Direct Assessment Methodology."

TG 209
To develop a standard test method related to NACE Standard RP0285-95, "Corrosion Control of Underground Storage Tank Systems by Cathodic Protection."

TG 211
INACTIVE To develop a state-of-the-art report on the application of the 100 mV cathodic polarization criterion.

TG 212
To review, revise, or reaffirm as necessary NACE SP0102-2010 (formerly RP0102), "In-Line Inspection of Pipelines," to ensure it is current and complementary to other industry ILI standards.

TG 223
To write a standard practice for the in situ internal cleaning and coating of steel pipelines. This includes application procedures, mechanical and chemical cleaning procedures, types of coating, inspection, quality control, quality assurance, and equipment used for these processes.

TG 237
(INACTIVE) Review and revise as necessary NACE TM0106-2006, "Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines."

TG 254
Collect the latest information and technology to prepare for the next revision of NACE Standard TM0212-2012, “Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion on Internal Surfaces of Pipelines.”

TG 273
To review and revise SP0204-2015 (formerly RP0204), "Stress Corrosion Cracking (SCC) Direct Assessment Methodology."

TG 279
Collect the latest information and technology to develop the next revision of NACE SP0207-2007, "Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines."

TG 289
To review and update NACE Report 10A392, "Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Surfaces," as necessary. Change name to: "Effectiveness of Cathodic Protection on Thermally Insulated Steel Piping in Buried or Immersed Service."

TG 293
Review and revise as necessary NACE SP0206-2006, "Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)."

TG 294
INACTIVE Prepare a standard on aboveground survey techniques for the evaluation of underground pipeline coating condition (DCVG, Pearson, etc.).

TG 305
To revise or reaffirm NACE SP0110-2010, "Wet Gas Internal Corrosion Direct Assessment Methodology for Pipelines."

TG 315
Review and reaffirm or revise SP0208-2008, “Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines,” as appropriate.

TG 327
INACTIVE - Prepare state-of-the-art report on the phenomenon of AC corrosion and outline the approach to its mitigation.

TG 357
INACTIVE Review and revise as necessary joint NACE/PODS SP0507-2007, "External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX) Format."

TG 360
INACTIVE Review and revise as necessary NACE SP0169-2013 (formerly RP0169), "Control of External Corrosion on Underground or Submerged Metallic Piping Systems," including Section 6, Criteria.

TG 362
Prepare a state-of-the-art report on electrical cables for cathodic protection with emphasis on cable insulation and conductor types.

TG 364
INACTIVE Review and revise as necessary NACE Standard TM0101-2001, "Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems."

TG 369
To develop a state-of-the-art report on the relationship of the external environment's properties and characteristics on the corrosiveness of onshore structures based on an extensive literature review.

TG 370
To develop a process-oriented document providing guidance on managing corrosion of pipelines. This document would reference existing standards, life-cycle methodologies, maintenance optimization, decision analysis, risk assessment, etc.

TG 377
INACEIVE Prepare a standard that will provide guidelines on how to implement the CDA methodology as part of the pipeline integrity re-assessment process.

TG 382
Review and revise as necessary NACE Standard TM0172-2001, "Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines."

TG 387
INACTIVE To develop a standard on corrosion and degradation issues for transportation and storage of biofuels.

TG 401
INACTIVE Develop a standard that pipeline operators can utilize to select appropriate methods for performing an integrity assessment for stress corrosion cracking and external and internal corrosion threats.

TG 410
Develop a standard that establishes qualification expectations for personnel, equipment, and procedures for guided wave testing for the evaluation of buried, aboveground, onshore, and offshore pipelines. This standard should include performance requirements that demonstrate and/or validate the capabilities, limitations, range, and the detection and identification capabilities of guided wave testing for both conventional and permanently installed sensors.

TG 426
Develop a standard practice to address ICDA for multiphase flow pipelines for on/offshore.

TG 440
Development of a standard practice on hydrotesting and long-term wet storage of pipelines, risers, and subsea equipment.

TG 446
Review and revise as necessary NACE SP0186-2007 (formerly RP0186), "Application of Cathodic Protection for External Surfaces of Steel Well Casings."

TG 447
To develop a state-of-the-art report on flow and corrosion modeling to provide guidelines for selecting them. This report would refer to existing ICDA documents.

TG 455
INACTIVE To develop an appropriate test method to be used for water-soluble liquid hydrocarbon pipeline cargoes.

TG 464
To develop a technical committee report on applying the direct assessment process in the assessment of both internal and external corrosion integrity of process piping systems.

TG 480
Review and revise if necessary NACE Publication 35201, "Technical Report on the Application and Interpretation of Data from External Coupons Used in the Evaluation of Cathodically Protected Metallic Structures."

TG 502
To write a state-of-the-art report describing the technology, applications, and limitations of 3D laser and structured light tools for the measurement of external pipe surface corrosion anomalies.

TG 517
To develop a standard practice to address corrosion control of reinforced concrete piles in nonmarine applications such as for tanks, buildings, bridges, etc.

TG 522
To create technical guidance for using in-line inspection devices in the direct assessment phase of external corrosion direct assessment.

TG 533
To prepare an informational report of the subject of UDC (underdeposit corrosion) in pipelines summarizing available literature and common practices.

TG 539
Review and Revise as necessary NACE SP0286-2007, "Electrical Isolation of Cathodically Protected Pipelines."

TG 543
Develop a standard that addresses corrosion control beyond cathodic protection for the soil-side of AST floors. The standard would provide comprehensive descriptions of all factors that contribute to soil-side corrosion of the tank floor plates, as well as provide guidelines for the use of other corrosion control technologies that are applicable to tank floors.

TG 547
Develop a report looking at what is being done to monitor the carrier pipe and casing condition using CP coupons, ER probes, permanent reference electrodes, etc. inserted into the annular space of the casing.

TG 552
Develop a standard practice to guide the CUI inspection process to determine positive and negative indicators of condensation ingress within cladded or coated pipes.

   STG 36 Process Industry—Materials Performance in Chemicals (View TG/TEG/WG) - Agenda/Minutes

STAG P70
To exchange and compile information and increase awareness of materials performance in various chemical processes by documenting experience with equipment and materials, drawing up relevant standard practices and test methods for solving industry problems, disseminating information on reliable and economic solutions to material and corrosion problems, and encouraging the use of preventive corrosion measures. This will include experience of various metallic materials as related to properties, corrosion resistance, fabrication, weldability, repair techniques, and application in various process environments.

TEG 115X
Exchange of experiences on the use of materials for sulfuric acids.

TEG 118X
To discuss and disseminate information about unusual failures of equipment and materials across industries.

TEG 119X
Exchange of experience on receiving, handling, and storage of hydrogen fluoride and hydrofluoric acid.

TEG 121X
To identify processes and process environments in which high-temperature, high-pressure liquid solutions are present and cause corrosion. To encourage communication of typical corrosion problems and solutions through symposia and informal information exchange sessions.

TEG 398X
Exchange of experiences on the use of materials for hydrochloric acid, chlorine, hypochlorite, chlorite, and chlorate.

TEG 509X
To conduct information exchanges on materials selection, corrosion, and corrosion control in the mineral processing and extractive metallurgical industries.

TG 217
To review NACE SP0294 (formerly RP0294), "Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures."

TG 325
To review/revise NACE SP0198-2016

TG 358
To revise and update NACE Publication 5A171, "Materials for Storing and Handling Commercial Grades of Aqueous Hydrofluoric Acid and Anhydrous Hydrogen Fluoride."

TG 372
To review and revise as necessary NACE Standard RP0391, "Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures."

TG 433
Review and revise or reaffirm NACE Publication 5A192, "Integrity of Equipment in Anhydrous Ammonia Storage and Handling"

TG 531
To review and revise as necessary NACE Standard RP0497-2004, "Field Corrosion Evaluation Using Metallic Test Specimens."

   STG 37 Process Industry—High Temperature (View TG/TEG/WG) - Agenda/Minutes

TEG 123X
Exchange, collect, and disseminate information on intermetallic aluminides and silicides, oxide dispersion-strengthened (ODS) alloys, ceramic composites, refractories, and thermal-spray coatings.

TEG 126X
To exchange and disseminate information on materials uses in high-temperature environments, including repair techniques for metals after high-temperature exposure, nondestructive inspection methods, and life assessment techniques. A particular focus is on equipment associated with thermal pyrolysis and reformer processes.

TEG 128X
Provide a forum for the exchange of information and experiences regarding metal-dusting phenomena.

TEG 270X
Exchange and disseminate information on high-temperature materials performance, degradation, and life assessment of reformer components.

TG 124
INACTIVE To review and revise as necessary TM0498-2014, "Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture."

   STG 38 Process Industry—Pulp (View TG/TEG/WG) - Agenda/Minutes

TEG 232X
Organize technical symposia related to corrosion and materials issues in the pulp and paper industry.

   STG 39 Process Industries—Materials Applications and Experiences (View TG/TEG/WG) - Agenda/Minutes

TEG 114X
Share experiences on the use of ferritic and duplex stainless steels as related to corrosion resistance, weldability, and availability.

TEG 116X
Exchange of experiences on the use of austenitic alloys as related to properties, fabrication, and application.

TEG 120X
Exchange of experiences on the use of reactive metals as related to properties, fabrication, and application.

   STG 40 Military and Aerospace Systems and Facilities (View TG/TEG/WG) - Agenda/Minutes

TG 511
This standard delineates the requirements for CUP test standards used for NDE equipment used to evaluate CUP on military aircraft.

   STG 41 Electric Utility Generation (View TG/TEG/WG) - Agenda/Minutes

TEG 091X
INACTIVE To provide a forum for exchange and dissemination of information on the performance of materials in incineration facilities for municipal, industrial, and hazardous wastes, and in combustion/gasification facilities for low-grade and biomass-derived fuels. Scope encompasses associated energy recovery and air pollution control scrubbing systems.

TEG 164X
INACTIVE To collect, investigate, and disseminate information on methods and equipment utilized for monitoring the operation, water chemistry, fuel side, and physical integrity of steam-generating systems.

TEG 182X
Sponsor information exchanges and symposia on corrosion in geothermal systems.

TEG 183X
Discussion of corrosion and materials technology in combustion and conversion (gasification) of solid fossil fuels, biomass, and waste fuels for power generation and production of clean fuels.

TEG 224X
Exchange information on corrosion issues, including corrosion control, in nuclear plants.

TEG 368X
Joint NACE/IEEE committee to provide an open forum for electric utilities, consultants, and industry suppliers to discuss grounding and corrosion issues in electrical power and transmission and distribution systems.

TEG 465X
Liaison between the sponsoring committees and the specific task groups that will develop standards, training, inspection, and assessment of buried/underground piping in nuclear power plants while focusing on discussions for the application of cathodic protection and coating systems.

TEG 473X
To identify and qualify industry needs for training and certification of engineering, maintenance and construction personnel in system design, mitigation of degradation mechanisms and remediation of preexisting component degradation.

TG 029
INACTIVE To review and revise as necessary NACE Publication 42102, "Corrosion in Power and Communication Manholes."

TG 386
INACTIVE To review and revise as necessary NACE SP0215-2015/IEEE Std 1839, Joint Standard Practice for Below-Grade Corrosion Control of Transmission, Distribution, and Substation Structures by Coating Repair Systems

TG 395
INACTIVE To review and revise as necessary NACE SP0315-2015/IEEE Std 1835, Joint Standard Practice for Atmospheric (Above Grade) Corrosion Control of Existing Electric Transmission, Distribution, and Substation Structures by Coating Systems

TG 404
INACTIVE To review and revise as necessary NACE Pub 41013, "State-of-the-Art Report: External Corrosion, Assessment, and Control of Buried Piping Systems in Nuclear Power Plants."

TG 431
Establish a guide for determining strength loss of steel poles and write a standard.

TG 432
INACTIVE Review and revise as necessary NACE SP0415-2015/IEEE Standard 1895, Standard Practice for Below-Grade Inspection and Assessment of Corrosion on Steel Transmission, Distribution, and Substation Structures

TG 441
Development of a minimum performance standard for above-grade corrosion control utilizing protective coatings for utility transmission, distribution, and substation structures.

TG 442
Development of a minimum performance standard for below-grade corrosion control utilizing protective coatings for utility transmission, distribution, and substation structures.

TG 467
To write a standard material requirements (MR) for materials selection for nuclear buried piping.

TG 471
INACTIVE To review and revise as necessary NACE SP0515-2015, “Implementing Nondestructive Evaluation Technologies to Evaluate Buried Pipe in Nuclear Power Plants.”

TG 481
Develop a standard practice for characterization of buried pipe coating condition during direct (bellhole) examination.

TG 485
Develop a standard practice for determining the type of an existing buried pipe coating system.

TG 491
To write a standard practice that defines design, construction, maintenance, and operation of cathodic protection systems in nuclear power plants.

TG 529
To write a new standard practice addressing the atmospheric above grade inspection and assessment of corrosion on steel electrical transmission, distribution, and substation structures as a companion to TG 432’s below grade inspection standard. Expect to be jointly issued with IEEE.

TG 538
This joint NACE/IEEE committee will write a standard practice for use by electric utilities to inspect and assess corrosion of weathering steel on in-service transmission, distribution, and substation structures.

   STG 43 Transportation (View TG/TEG/WG) - Agenda/Minutes

TEG 064X
To keep abreast of industry changes and techniques and report findings annually.

TEG 291X
Technical information exchange in conjunction with an STG meeting.

TG 061
To update and revise NACE SP0592-2006 (formerly RP0592), "Application of a Coating System to Interior Surfaces of New and Used Railway Tank Cars in Concentrated (90-98%) Sulfuric Acid Service."

TG 063
Develop guidelines for railcar lining requalification.

TG 067
To review and revise or reaffirm NACE SP0302-2007 (formerly RP0302), "Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service."

TG 271
To prepare a technical committee report describing surface decontamination procedures for railcars prior to coating application. Pub in 2014 as NACE Publication 43114 (2014 Edition). Due for review in 2024.

TG 332
To review and revise or reaffirm as necessary NACE SP0386-2007 (formerly RP0386), “Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service.”

TG 333
To review and revise or reaffirm NACE SP0295-2008 (formerly RP0295), "Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars."

TG 339
Review and revise as appropriate NACE Standard RP0692-2003, "Application of a Coating System to Exterior Surfaces of Steel Rail Cars."

TG 366
Review and revise as appropriate NACE Publication 14C296 to ensure information is still relevant.

TG 378
To prepare a state-of-the-art report on waterborne coatings on railcars.

TG 379
To prepare a state-of-the-art report on surface preparation by encapsulated blast media for repair of existing coatings on railcars.

TG 394
To review and revise NACE Standard RP0495-2003.

TG 406
Review and revise as necessary NACE SP0398-2014 (formerly RP0398), "Recommendation for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors."

TG 437
To prepare a state-of-the-art report for the application of maintenance overcoating of railcar exteriors.

TG 444
To produce a standard that provides guidelines for inspecting, rating, and documenting the condition of interior coatings and linings in railroad tank cars to comply with Hm 201.

TG 456
Prepare a state-of-the-art report outlining currently used procedures for dry film thickness measurement and recording for coatings on railcars.

TG 535
To prepare a state-of-the-art report regarding corrosion and protection of railroad tank cars in crude oil service.

   STG 44 Marine Corrosion: Ships and Structures (View TG/TEG/WG) - Agenda/Minutes

TEG 181X
To study the causes, effects, and remedies of corrosion in various marine vessels.

TEG 523X
To discuss and disseminate information on marine corrosion of copper and copper alloys.

TG 392
To review and revise as necessary SP0508, "Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts."

TG 402
INACTIVE To develop a standard outlining required components of the IMO Performance Standard for Protective Coatings (PSPC) Coating Technical File (CTF) for collection during construction, delivery after construction, and onboard maintenance documentation.

TG 452
To review and revise or reaffirm NACE Standard TM0112-2012, "Test to Determine the Potential Corrosion Effects of Ballast Water Treatment Systems on Ballast Tanks."

TG 461
To develop a standard on how to perform both in-docking hull roughness readings (before blasting and cleaning in dry dock) and before out-docking hull roughness readings.

TG 475
To develop a pictorial standard to be used to evaluate the (1) extent, (2) location, and (3) type of fouling to ship hulls and propellers.

TG 476
To write a standard practice that defines a life cycle of corrosion protection for offshore wind power structures.

TG 542
To develop a standard providing terminology and definitions for the site-applied system for corrosion protection, technical requirements, evaluation methods and criteria for performance, packing, and marking.

   STG 45 Pollution Control (View TG/TEG/WG) - Agenda/Minutes

TEG 230X
Arrange symposia and informal technical exchanges.

TG 129
To review and revise as necessary SP0292-2012, "Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment."

TG 199
To review and revise as necessary NACE SP0199-2009, "Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment."

   STG 60 Corrosion Mechanisms (View TG/TEG/WG) - Agenda/Minutes

TEG 186X
The assessment and dissemination of existing information and the promotion of new studies to minimize, circumvent, or solve environmental cracking problems.

TEG 187X
Exchange of information as to mechanisms, case histories, and information related to microbiologically influenced corrosion (MIC).

TEG 189X
To collect, correlate, and disseminate information concerning the development of more effective means of dealing with the problems caused by atmospheric corrosion of metals and to provide a better understanding of the mechanisms involved in atmospheric corrosion.

TEG 213X
Provide a forum for technology and knowledge exchange and dissemination for flow effects on corrosion.

TEG 310X
INACTIVE To exchange information relating to the characterization of resistance of steel to SOHIC.

TEG 331X
Provide a forum for information exchange concerning the science and technology of corrosion of biomedical implant devices.

TEG 407X
Exchange information regarding pitting corrosion: characterization, monitoring, and mechanisms.

TEG 474X
Evaluating prevention of corrosion using nanotechnology and corrosion/degradation issues in nanomaterials.

TG 458
Produce a report summarizing the state-of-the-art in the field of microbiologically influenced corrosion (MIC) for various industries.

TG 495
Develop a standard to describe testing and evaluation of magnesium as a suitable biodegradable alloy in biomedical applications.

   STG 61 Inhibition—Corrosion and Scaling (View TG/TEG/WG) - Agenda/Minutes

TEG 093X
To study and disseminate information about new chemicals, products, and applications of vapor corrosion inhibitors (VCIs).

TEG 094X
To review state-of-the-art corrosion inhibitor research with respect to mechanisms, modeling, and development.

TEG 095X
To study and develop the requirements of corrosion inhibitors in applications where ultra-high temperatures are the normal working environment.

TEG 145X
To conduct a symposium based on NACE SP0487 (formerly RP0487).

TEG 184X
Study the application of corrosion inhibitors and/or scale/deposit inhibitors and their mechanisms of inhibition and disseminate information about such inhibitors and their use.

TEG 515X
Exchange information and technology on top-of-line corrosion in oil and gas production. Sponsor symposia and other formal technical information exchange functions.

TEG 525X
To cover corrosion risks introduced during hydro testing and post-hydro testing mothballing to include chemical treatment, environment regulations, use of brackish or seawater, long-term effects, relevance of international standards to the Middle Eastern environment.

TG 215
To review and revise as necessary NACE Standard TM0208-2013, "Laboratory Test to Evaluate the Vapor-Inhibiting Ability of Volatile Corrosion Inhibitor Materials for Temporary Corrosion Protection of Ferrous Metal Surfaces." The name of the current standard TM0208 will remain unchanged in the revision of 2018

TG 261
To write a standard on rust preventives and vapor corrosion inhibitors for interim (temporary) corrosion protection.

TG 380
To review and report on available testing and mitigation methods for underdeposit corrosion in the form of a state-of-the-art report.

TG 420
INACTIVE To develop a standard test method to evaluate the vapor inhibiting ability for corrosion prevention of representative nonferrous metal surfaces (VIA-NF) by means of volatile or vapor corrosion inhibitors (VCIs) using common laboratory methods and materials available both to producers and consumers of VCIs.

   STG 62 Corrosion Monitoring and Measurement—Science and Engineering Applications (View TG/TEG/WG) - Agenda/Minutes

TEG 097X
To exchange and disseminate information on problems and limitations in the generation and interpretation of electrochemical data.

TEG 098X
To exchange and disseminate information on acoustic emission technology for corrosion measurement and detection.

TEG 100X
To collect and disseminate information on new developments in the area of sensors for the measurement of corrosion and corrosiveness.

TEG 108X
To provide a forum for the exchange and dissemination of information on the correlation of measurements of hydrogen permeation with its causes, such as corrosion, and effects, such as hydrogen cracking, via symposia and information exchange.

TEG 316X
Exchange information on multielectrode systems for corrosion monitoring and electrochemical studies.

TEG 391X
To enable liaison and discussions between members of task group writing revision to NACE Publication 3T199 and field users.

TG 137
INACTIVE To review and revise as necessary NACE Pub 1C184, "Monitoring Internal Corrosion in Oil and Gas Production Operations with Hydrogen Probes"

TG 256
INACTIVE To review and revise as necessary NACE TM0211-2011, "Durability Test for Copper/Copper Sulfate Permanent Reference Electrodes for Direct Burial Applications."

TG 318
INACTIVE Coordinate joint NACE/ASTM development of a combined TM0169/ASTM G31 standard.

TG 390
To revise NACE Publication 3T199, "Techniques for Monitoring Corrosion and Related Parameters in Field Applications."

TG 436
INACTIVE To review and revise as necessary TM0113-2013, "Evaluating the Accuracy of Field-Grade Reference Electrodes"

TG 521
To develop a standard test method for assessing the "nonshielding" characteristics of a variety of pipeline coatings used with cathodic protection.

TG 530
To write a standard detailing the design, use, and performance of electrochemical-based sensors to facilitate the selection and application of measurements for atmospheric testing and monitoring.

   STG 47 Corrosion in Mining and Mineral Processing (View TG/TEG/WG) - Agenda/Minutes

ADHOC STG 47